IPF – Image’In Pyramide Fine

# A wide choice of colours and finishes

You can choose any colour from the standard RAL colour chart (excluding pearlescent, glitter and fluorescent colours) without any price difference.
As an option, we can also work outside the RAL colour chart, if necessary by matching a sample of your supply.

We also offer few finishes that are a little unusual, such as ‘Marron Oxyde Urbain’ to give a ‘rusty’ look, or the ‘Zinc’ patina. The latter is an option at extra cost.

Finally, all our planters are varnished as standard. The varnish comes in a choice of 4 finishes: matt, satin, gloss or micronised (also known as “sandblasted”). This latter provides optimum protection for the colour, particularly against UV rays, to ensure that the colours last over time.

 

# Possible options

Options can be added to provide the best possible response to the features you need for your planters :

– System for anchoring to the ground ;
– Adjustable feet ;
– Installed on XPS buffers for a distributed anti-punching load.

Image’in is a range of planters with a contemporary, uncluttered style.

Made from Natura ® fibre cement, our flared planters are made to measure to suit your every need.
In direct contact with the designer, we can provide you with the best possible support in defining your product.

 

# Fibre cement

Fibre cement is a rot-proof and frost-resistant material. These qualities make IMAGE’IN flared pots ideal for both indoor and outdoor use. Fibre cement is also insensitive to saline and chlorinated environments. It is therefore the most suitable product for use by the sea or poolside.

Fibre cement is quite heavy by nature and therefore stable in the wind, despite their narrow base. In the event of heavy exposure, you can add ballast to the bottom of the high tubs for safety.

Fibre cement is rigid; it will behave rather like pottery. This material is therefore suitable for reasonably sized planters with simple functions. For larger volumes and more complex systems, we offer our STEELAB planters in sheet metal.

 

# Flared pots “IPF”

The format illustrated here, “IPF – Image’In Pyramide Fine”, is a planter that is both tall and thin. Particularly slender, this pot will show off your plants to best advantage: as a trunk, a ball, drooping …
A few formats are featured here to showcase our manufacturing capabilities. Don’t limit yourself to these formats and let your imagination run wild !

 

# Installation

IMAGE’IN flared pots rest on the ground on its periphery with a hollow joint at its base. The bottom is therefore slightly raised. This means a loss of useful height of around 10cm.

 

# Water management

In its classic configuration, the bottom is drained. A perforation in the base allows any excess water to drain away under the planter. However, other configurations are available as options:
– Horticultural drainage system with water reserve;
– Barbican for lateral drainage;
– Watertight base for indoor use.

 

# Documentation

> Download the data sheet         

> Choose Colour and Options

>> Consult the indicative price list / See all IMAGE’IN documentation