Square planter made to measure in fibre cement

IMAGE’IN made-to-measure square planter in fibre cement

# All colours and finishes

We offer the IMAGE’IN square planter in all the colours on the standard RAL colour chart (excluding pearlescent, glitter and fluorescent shades).

Please contact us to assess the feasibility of using colours from other colour charts. In any case, it will always be possible to countertype a sample of your supply to achieve the shade you want.

We also offer few finishes that are a little unusual, such as ‘Marron Oxyde Urbain’ to give a ‘rusty’ look, or the ‘Zinc’ patina. The latter is an option at extra cost.

Finally, we varnish all our tubs for optimum colour protection, particularly against UV rays. This varnish is available in a choice of four finishes: matt, satin, gloss or micronised.

# The options

To give you the functionality you need, you can add a wide range of options to your planters, such as :

– System for anchoring to the ground ;
– Concealed handling castors or visible braked castors ;
– Adjustable feet or pedestals;
– Installed on XPS buffers for a distributed anti-punching load ;
…

Image’in is a range of planters with a contemporary, uncluttered style.

Made from Natura ® fibre cement, our flared planters are made to measure to suit your every need.
In direct contact with the designer, we can provide you with the best possible support in defining your product.

# Fibre cement

Fibre cement is a rot-proof and frost-proof material, which are major qualities for outdoor planters. What’s more, fibre cement is impervious to salty or chlorinated environments, making it ideal for use by the sea or near swimming pools.

Our fibre cement planters are quite heavy by nature and therefore stable in the wind, despite their narrow base. In the event of heavy exposure, you can add ballast to the bottom of the high tubs for safety.

Fibre cement is rigid; it will behave rather like pottery. This material is therefore suitable for reasonably sized planters with simple functions. For larger volumes and more complex systems, we offer our STEELAB planters in sheet metal.

# The “ICM” square planter

The format illustrated here, “ICM – Image’In Carré Moyen”, is characterised by its square cross-section and medium height. Here are a few formats to illustrate our manufacturing capabilities. Feel free to choose the section and height that suits you best. Let your imagination run wild !

# Installation

These planters rest on the ground on its periphery with a hollow joint at its base. The bottom is therefore slightly raised. This means a loss of useful height of around 10cm. However, this wasted volume can be reduced if necessary on low bins to provide a sufficient quantity of soil.

# Water management

In its classic configuration, the bottom is drained. A perforation in the base allows any excess water to drain away under the planter. However, other configurations are available as options:
– Horticultural drainage system with water reserve;
– Barbican for lateral drainage;
– Watertight base for indoor use;
– Open bottom for contact with the soil.